TR Defence

Turkey developed advanced armors

Turkish engineers within Nurol Technology Inc., after three years of R & D work in defense industry as one of the greatest needs were able to produce advanced ballistic armor. Usually shielded by Israeli armored vehicles were previously.

Turkey is the first domestic armor and “T-Armor” (Turkish armor), called for the development of products Nurol Technologies Inc. Has invested 15 million euros.

Within the Technology Group of Companies Inc. Nurol Nurol in 2008, fully indigenous advanced ballistic armor for the defense industry to start producing the work was completed. Nurol Group of Companies, with facilities produced in Ankara ballistic armor, military and private institutions in the country and abroad, successfully passed the tests.

Turkish armor, soldiers who served in the southeast, buildings, all ground and air vehicles that can be used for protection.

Company officials, the standards of a ballistic protective vest (body armor) is between 6-8 kilograms, was developed by Turkish engineers, said the vests were 4-5 pounds.

With the highest level of protection of a ballistic protective vest the authorities said about 13 kilograms, Nurol Technology vest in the same degree of protection is 7-9 pounds were recorded.

Israeli armored vehicles before, usually shielded by authorities who said, “We were dependent on external armor on. Countries, for use in armor technology, machinery and equipment do not even sell. We are our own body armor technology will be used in furnaces and machines we have manufactured their own. No armor can produce solutions as fully indigenous. Raw materials as well as all local produce. A strategic issue that will strengthen Turkey’s power, “he talked.

BETWEEN THE WORLD’S BEST

Produced abroad and testing of the sample passes through armor, and after successful results from many countries are starting to get serious about the demands of the authorities, they noted:

“Countries, armor, while selling to another country, I do not give a time when the best armor. Usually the old model, developed an earlier sell armor. Developed armor, among the best in the world. For this reason, we will keep the best solutions for our country. A strategic issue because this cause. Our military is fighting in very difficult conditions in the Southeast. Already carry a very heavy loads. Ballistic armor vests do not want to move because it was too heavy. Whereas the lighter steel vests and they will use when we present it. ”

The three are ONE WORLD COMPANY

Authorities, Nurol Technology Inc. ‘s, R & D activities after the armor used in construction materials, boron carbide-producing world, three from the company to become one, that this material is very light because it is the aircraft and personnel jackets used in indicating they were.

Sensitive and advanced manufacturing techniques and any threat to the proof, according to international standards, lightweight and ergonomically advanced ceramic plates produced in performing the telling authorities, if requested, any ballistic requirements, environmental conditions, multiple shots to the criteria in accordance with the various threats against the designs that could do they record .

Personal Body Armors

SİPER®

SİPER® armors are the best solution for personnel protection and the lightest weight available . SİPER® armor solutions were tested and approved at international independent laboratories.

SİPER® armors provide solutions for all levels of NIJ standard and balistic vests could be designed according to customer requirements together with side and shoulder plates.

Ceramic material solutions

Our product lines offers a wide range of ceramic materials according to balistic protection level including aluminium oxide, silicon carbide, reaction bonded silicon carbide, boron carbide and reaction bonded boron carbide.

Composites

Aramid, high-density polyethylene, carbon fiber, S2 and E-glass  are materials that are used in our solutions.The product gains %30 in balistic performance when these materials combined with ENAPRO® technology.

SİPER® -G Vest armors

Siper-G-P01:

Weight:  1.4 kg

NIJ Level III

Material:  UHMWPE

Siper-G-P10:

Weight < 1.8 kg

NIJ Level III+

Material:  Seramic-Compozit

Siper-G-P20:

Weight < 3.2 kg

NIJ Level IV

Material:  Seramic-Compozit

Siper-G-P30:

Weight< 2.7 kg

NIJ Level IV

Material:  Seramic-Compozit

Siper-G-P40:

Weight < 2.45 kg

NIJ Level IV

Material:  HIF-CC-Compozit

Vehicle Armors

KALKAN®

KALKAN® vehicle armors are specially designde for military military vehicles considering minimum weight and maximum protection parameters.Various modular design hybrid armor solutions could be provided according to different kinds of threats.

KALKAN® Add-on armor is a lightweight protection system which adds least possible weight to the vehicle.

Ceramic material solutions

Our product lines offers a wide range of ceramic materials according to balistic protection level including aluminium oxide, silicon carbide, reaction bonded silicon carbide, boron carbide and reaction bonded boron carbide.

Composites

Aramid, high-density polyethylene, carbon fiber, S2 and E-glass  are materials that are used in our solutions.The product gains %30 in balistic performance when these materials combined with ENAPRO® technology.

KALKAN® armors provide complete or modular systems for  armored personal carrrier or armoured combat vehicles.It is more economical and efficient where traditional steel or aluminium based materials are not sufficient.

All KALKAN® armours complies with STANAG 4569,2920 ,NIJ level B and local UL standarts.All products can be easily applied, have resistance to environmental effects (MIL-STD-810) and multi-hit.

Aircraft Armors

FAZIL®

Fazıl® armor systems provides the most effective and lightweight armor solutions by boron carbide and silicon carbide ceramics.Fazıl aircraft armors can be provided in any shape or size and customised solutions are available to meet specific requirements.

Lightweight Armor Systems

Aircraft armor plates are designed to have maximum protection for crew seats, engines, passenger floor armor and optionally other areas.

Geometric Solutions

Provides maximum protection especially in tight areas like crew seat and can be easily assembled to the required surface with required ergonomics.

Ceramic Material Solutions

Our product lines offers a wide range of ceramic materials including silicon carbide, reaction bonded silicon carbide, boron carbide and reaction bonded boron carbide.

Composites

Aramid, high-density polyethylene, S2 and E-glass  are materials that are used in our solutions.

Aircraft Armor /

Fazıl®-C

Fazıl®-C type aircraft armor kits are specially designed for military transport aircarft to cover the maximum area with the least amount of balistic plates.Without any change in design, it is possible to have complete system solution for transport aircrafts with minimum number of joints.

Fazıl®-C meets the requirements of ;

–          CASA CN-235

–          C130 Hercules

–          C160 Transall

Modular Fazıl®-C armors with required flexible design, provides required protection for cockpit area, cargo area and doors.

Helicopter Armor / Fazıl®-H

Fazıl®-H type armors are supplied especially for helicopters with high endurance and special joint systems.

Fazıl®-H type armors are used as floor and side armors for general purpose helicopters like UH-1, UH-60 or Cougar and also offers special designs which can be used as crew seats in AH-1 attack helicopters.Engines , radome or transmission areas could be armored if requested.

Fazıl®-H armors provide maximum protection, countering the fire at close range together with its resistance to multi-hit.

Naval Vessel Armors

TABYA®

Tabya® advanced balistic armors with its special configuration are specially designed for the sea environment.It can be easily applied and provides customised lightweight protection solutions.

Tabya® armors are used to protect ships combat information centers, bridge stations, weapon systems.They can also be used as Add-on in order to increase the protection levels.

Short URL: http://www.trdefence.com/?p=998

Posted by on Jun 26 2010 Filed under Headlines, Industry News. You can follow any responses to this entry through the RSS 2.0. Both comments and pings are currently closed.

7 Comments for “Turkey developed advanced armors”

  1. […] Re: Turkish Ongoing Land Vehicle Programs Aircraft Armors FAZIL® Fazıl® armor systems provides the most effective and lightweight armor solutions by boron carbide and silicon carbide ceramics.Fazıl aircraft armors can be provided in any shape or size and customised solutions are available to meet specific requirements. Lightweight Armor Systems Aircraft armor plates are designed to have maximum protection for crew seats, engines, passenger floor armor and optionally other areas. Geometric Solutions Provides maximum protection especially in tight areas like crew seat and can be easily assembled to the required surface with required ergonomics. Ceramic Material Solutions Our product lines offers a wide range of ceramic materials including silicon carbide, reaction bonded silicon carbide, boron carbide and reaction bonded boron carbide. Composites Aramid, high-density polyethylene, S2 and E-glass are materials that are used in our solutions. ———- Post added at 11:50 PM ———- Previous post was at 11:49 PM ———- Aircraft Armor / Fazıl®-C Fazıl®-C type aircraft armor kits are specially designed for military transport aircarft to cover the maximum area with the least amount of balistic plates.Without any change in design, it is possible to have complete system solution for transport aircrafts with minimum number of joints. Fazıl®-C meets the requirements of ; – CASA CN-235 – C130 Hercules – C160 Transall Modular Fazıl®-C armors with required flexible design, provides required protection for cockpit area, cargo area and doors. ———- Post added at 11:50 PM ———- Previous post was at 11:50 PM ———- Helicopter Armor / Fazıl®-H Fazıl®-H type armors are supplied especially for helicopters with high endurance and special joint systems. Fazıl®-H type armors are used as floor and side armors for general purpose helicopters like UH-1, UH-60 or Cougar and also offers special designs which can be used as crew seats in AH-1 attack helicopters.Engines , radome or transmission areas could be armored if requested. Fazıl®-H armors provide maximum protection, countering the fire at close range together with its resistance to multi-hit. ———- Post added at 11:51 PM ———- Previous post was at 11:50 PM ———- Naval Vessel Armors TABYA® Tabya® advanced balistic armors with its special configuration are specially designed for the sea environment.It can be easily applied and provides customised lightweight protection solutions. Tabya® armors are used to protect ships combat information centers, bridge stations, weapon systems.They can also be used as Add-on in order to increase the protection levels. Short URL: http://www.trdefence.com/?p=998 […]

  2. […] Turkey developed advanced ballistic armor – “T-Armors” | TRDEFENCE […]

  3. […] Turkey developed advanced armors | TRDEFENCE […]

  4. C. Nelson

    Article needs to be worked on. It is unreadable at the moment…

  5. […] Turkey developed advanced ballistic armor – “T-Armors” | TRDEFENCE […]

  6. […] Turkey developed advanced ballistic armor – “T-Armors” | TRDEFENCE […]

Comments are closed



Please donate as little as $1 and help TR Defence remain as an independent publication.



Copyright ©2013 TR Defence, Inc. All rigths reserved. Contact: trdefence@live.com

Check out our new Forums today!